BD9300F-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | BD9300 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Max Output Current | 100mA |
| Operating Supply Voltage | 35V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 30mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~35V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 3.6V |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 20kHz~800kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 800kHz |
| Max Duty Cycle | 100 % |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD9300F-E2 Overview
It comes in a 14-SOIC (0.173, 4.40mm Width) package, so switching controller can be used for most applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 3.6V~35V voltage are supplied and operated. Work well in dc switchers with a -40°C~85°C TA. The switching controller is capable of switching at the 20kHz~800kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 14 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Searching "BD9300" will return other relevant dc to dc converter ics. In total, switching converter has 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. It is recommended that the input voltage of the dc dc voltage regulator be 3.6V. DC regulator outputs 35V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 30mA, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulators have a maximum frequency of 800kHz. To run the voltage regulator dc to dc safely and reliably, users should apply 35V to the voltage regulator dc to dc. There will be 100mA current output from the dc switcher above 100mA.
BD9300F-E2 Features
Transistor Driver Outputs
Switching Frequency: 20kHz~800kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
BD9300F-E2 Applications
There are a lot of ROHM Semiconductor BD9300F-E2 DC to DC converter applications.
- Radio equipment
- Scientific testing
- Serial communication converter
- Electric water heaters
- Various CNC machine tools
- Television equipment
- Medical equipment
- Printing
- Electric heating, lighting
- Elevator lighting
