BD9853AFV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | BD9853A |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 100mA |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~16V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~2MHz |
| Max Input Voltage | 16V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Clock Sync | No |
| Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD9853AFV-E2 Overview
It comes in a 16-LSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~16V and has a 4.5V~16V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at 100kHz~2MHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. 16 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. A search for "BD9853A" will reveal other relevant dc to dc converter ics. There are only 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. A 5.5V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 100mA. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulators have a maximum frequency of 2MHz. When running the voltage regulator dc to dc in a circuit, users should apply 16V to ensure safety and reliability. The maximum input voltage of dc switcher is 16V, so users should limit their voltage accordingly. A voltage of 4.5V must be present in the supply. There will be 100mA output current greater than 100mA from the dc switcher.
BD9853AFV-E2 Features
Transistor Driver Outputs
Switching Frequency: 100kHz~2MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
BD9853AFV-E2 Applications
There are a lot of ROHM Semiconductor BD9853AFV-E2 DC to DC converter applications.
- Production lines
- Digital display device
- Plate bending machines
- Textile machinery
- Adjustable voltage or current linear circuits
- Window air conditioners
- Drilling machines
- Handheld GPS
- Alternators
- Computed tomography (CT)
