banner_page

BH5510KV-E2

BH5510KV-E2 datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from ROHM Semiconductor stock available at Noco


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BH5510KV-E2
  • Package: LQFP
  • Datasheet: PDF
  • Stock: 576
  • Description: BH5510KV-E2 datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from ROHM Semiconductor stock available at Noco(Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case LQFP
Number of Pins 48
Packaging Tape & Reel (TR)
Published 2010
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Type Integrated Circuit (IC)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
HTS Code 8542.39.00.01
Max Power Dissipation 1.18W
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Frequency 300kHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 48
Number of Outputs 6
Qualification Status Not Qualified
Operating Supply Voltage 5V
Temperature Grade INDUSTRIAL
Number of Channels 6
Interface Logic
Operating Supply Current 10.5mA
Output Current 3A
Output Current per Channel 3A
Fault Protection Over Temperature
Supply Voltage1-Nom 5V
Supply Voltage1-Min 3V
Length 7mm
Width 7mm

BH5510KV-E2 Overview


For packaging, Tape & Reel (TR) is used.A cost-saving measure, H bridge is included in LQFP.On the PCB H gate is mounted using Surface Mount.A transmission line can be terminated at a 48 termination with the H bridge whose characteristic impedance matches the transmission line.As H bridge ic of the signal interface, 48 pins are used as pronged contacts.The H bridge is powered by a voltage supply of 5V.The power supply pins and the output pins are conducting a current of 3A.This bridge driver functions in part thanks to the 48 pins working together.The Hbridge is equipped with 6 outputs.The operating supply voltage is kept at 5V to offer high efficiency.To prevent excessive costs, H bridge is acceptable to set the operating temperature to 85°C.The acceptable minimum value of operating temperature is -40°C so as to avoid excessive costs.

BH5510KV-E2 Features


Available in LQFP Package / Case
Number of Receivers: 5V
Operate supply voltage at -40°C

BH5510KV-E2 Applications


There are a lot of ROHM Semiconductor BH5510KV-E2 Full Bridge Drivers, Half-Bridge Drivers applications.

  • VTR
  • Dual DC motor
  • High-Current DC-DC Point-of-Load Converters
  • Voltage Regulators
  • Non-V-Core
  • Audio-visual equipment
  • Quad DC motor
  • High current, low profile DC-DC converters
  • V-Core
  • Telecom Microprocessor

Write a review

Note: HTML is not translated!
    Bad           Good