BM2P094
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2013 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 26V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 500μA |
| Voltage - Supply (Vcc/Vdd) | 8.9V~26V |
| Input Voltage (Min) | 8.9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Voltage, Short Circuit |
| Max Duty Cycle | 82 % |
| Duty Cycle | 75% |
| Output Isolation | Either |
| Voltage - Breakdown | 650V |
| Voltage - Start Up | 13.5V |
| Height Seated (Max) | 4.3mm |
| Length | 9.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
BM2P094 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The AC/DC power converter Tube is available for this product.There is a mounting point for this AC/DC converter in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~105°C TA °C in order for it to perform properly.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.As a result, the switching frequency reaches 65kHz .The voltage range of the supply can be set to 8.9V~26V (Vcc/Vdd).Total terminations are 7 .Through Hole is the recommended mounting method for the ac dc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .Current output is set to 500μA .During a 26V -voltage supply, the interface IC conducts.
BM2P094 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
Output Current at 500μA
Operating Supply Voltage at the range of 26V
BM2P094 Applications
There are a lot of ROHM Semiconductor BM2P094 AC DC Converters applications.
- Low-Voltage I/O System Power
- Auxiliary Power Supply
- Switching AC-DC Adapter
- Appliance Power Supplies
- Appliances
- Standby power supplies for IR
- Open Frame Switching Power Supply
- AC/DC LED Driver applications
- PDAs
- Power adapters for monitors
