banner_page

BP104FS

BP104FS datasheet pdf and Optical Sensors - Photodiodes product details from OSRAM Opto Semiconductors Inc. stock available at Noco


  • Manufacturer: OSRAM Opto Semiconductors Inc.
  • Nocochips NO: 606-BP104FS
  • Package: 2-SMD, Gull Wing
  • Datasheet: PDF
  • Stock: 805
  • Description: BP104FS datasheet pdf and Optical Sensors - Photodiodes product details from OSRAM Opto Semiconductors Inc. stock available at Noco(Kg)

Details

Tags

Parameters
Max Reverse Voltage (DC) 20V
Reverse Breakdown Voltage 20V
Wavelength 950nm
Dark Current 2nA
Spectral Range 800nm ~ 1100nm
Active Area 4.84mm2
Current - Dark (Typ) 2nA
Height 1.2mm
Length 4.5mm
Width 4mm
RoHS Status Non-RoHS Compliant
Mount PCB, Surface Mount
Mounting Type Surface Mount
Package / Case 2-SMD, Gull Wing
Number of Pins 2
Operating Temperature -40°C~100°C
Packaging Cut Tape (CT)
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 100°C
Min Operating Temperature -40°C
Operating Supply Voltage 1.3V
Diode Type PIN
Power Dissipation 150mW
Viewing Angle 120°
Response Time 20ns
Voltage - DC Reverse (Vr) (Max) 20V
Rise Time 20ns
Forward Voltage 1.3V
Fall Time (Typ) 20 ns

BP104FS Overview


A Cut Tape (CT) package protects these photodiodes from damage. In order to ensure safety, the photodiodes are packaged in 2-SMD, Gull Wing packages. When operating in reverse bias mode continuously, the photodiodes can withstand 20V voltage. A reverse-bias photodiode shouldn't exceed 20V continuously in reverse-bias mode. It has 2 pins for the photodiodes. Photodiodes on a circuit are capable of emitting 150mW heat. During operation, photodiodes should not have a temperature higher than 100°C. However, the photodiodes should be operated at a minimum temperature of -40°C. The reverse anode voltage for the photodiodes should be 20V. For a photodiode to operate, a voltage of 1.3V is required. A photodiode occurs even at 2nA current without light input.

BP104FS Features


Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Cut Tape (CT)
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 800nm ~ 1100nm
Response Time: 20ns
Viewing Angle: 120°

BP104FS Applications


There are a lot of OSRAM Opto Semiconductors Inc. BP104FS Photodiodes applications.

  • Light Barriers
  • Photo interrupters
  • Industrial Automation
  • Vision Controls
  • Medical and Industrial
  • Electronic Equipment
  • LiDAR
  • Measurement Levelling
  • Infrared data transmission
  • Optical Analytics

Write a review

Note: HTML is not translated!
    Bad           Good