BPV22NF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Side View |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Bulk |
| Published | 2005 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Capacitance | 70pF |
| Max Power Dissipation | 215mW |
| Current Rating | 50A |
| Lead Length | 26.5mm |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 120° |
| Forward Current | 50mA |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Breakdown Voltage | 60V |
| Rise Time | 100ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 100 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Breakdown Voltage | 60V |
| Wavelength | 940nm |
| Peak Wavelength | 940 nm |
| Reverse Voltage (DC) | 60V |
| Dark Current | 2nA |
| Spectral Range | 790nm ~ 1050nm |
| Active Area | 7.5mm2 |
| Current - Dark (Typ) | 2nA |
| Height | 6mm |
| Length | 4.5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BPV22NF Overview
It is important to note that these photodiodes are packaged in Bulk to prevent damage. To ensure safety, the photodiodes are packaged in Radial, Side View packages. Continuously reverse-biasing photodiodes can withstand 60V voltage. Continuously reverse-bias the photodiodes shouldn't exceed 60V. 2 pins are present on the photodiodes. In circuits containing photodiodes, 215mW heat may be released from the photodiodes. A photodiode should not operate at a temperature higher than 100°C. In spite of this, the photodiodes should be operated at a minimum operating temperature of -40°C. For the photodiodes, the reverse anode voltage should be 60V. It is generally recommended that the maximum heat released by photodiodes should be 215mW in a circuit. In the DC circuit, the photodiodes can function properly with a reverse voltage of 60V. ldeally, a photodiode should have a voltage of 1.3V. If you want photodiodes to work, you'll need a breakdown voltage of 60V. A photodiode occurs even at 2nA current without light input.
BPV22NF Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 790nm ~ 1050nm
Viewing Angle: 120°
BPV22NF Applications
There are a lot of Vishay Semiconductor Opto Division BPV22NF Photodiodes applications.
- Health Monitoring
- Sterilization Lamp Monitoring
- Electronic Equipment
- Solar Cells
- Low Cost Light Monitoring
- Infrared data transmission
- Diode Laser Monitoring
- Light Barriers
- Optical Switches
- Emitter Alignment
