Parameters |
Factory Lead Time |
1 Week |
Mount |
PCB, Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Side View |
Number of Pins |
2 |
Operating Temperature |
-40°C~100°C |
Packaging |
Bulk |
Published |
2008 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
100°C |
Min Operating Temperature |
-40°C |
Capacitance |
48pF |
Max Power Dissipation |
215mW |
Diode Type |
PIN |
Power Dissipation |
215mW |
Viewing Angle |
120° |
Forward Current |
50mA |
Voltage - DC Reverse (Vr) (Max) |
60V |
Rise Time |
70ns |
Forward Voltage |
1.3V |
Fall Time (Typ) |
70 ns |
Max Reverse Voltage (DC) |
60V |
Reverse Breakdown Voltage |
60V |
Wavelength |
950nm |
Reverse Voltage (DC) |
60V |
Dark Current |
2nA |
Spectral Range |
870nm ~ 1050nm |
Active Area |
4.4mm2 |
Current - Dark (Typ) |
2nA |
Height |
6mm |
Length |
4.5mm |
Width |
5mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
BPV23F Overview
Designed to protect these photodiodes against damage, these photodiodes are packaged in the Bulk. It is necessary to enclose the photodiodes in Radial, Side View packages for safety purposes. Photodiodes can only withstand 60V in reverse-bias mode indefinitely. Reverse-bias photodiodes should not be operated above 60V permanently. There are 2 pins on the photodiodes. During a circuit, the photodiodes could release 215mW heat. In order for photodiodes to operate, the temperature should not exceed 100°C. It should be noted that the photodiodes should be operated at -40°C as a minimum operating temperature. The reverse anode voltage for the photodiodes should be 60V. In general, the maximum heat released by the photodiodes should be 215mW in a circuit. DC photodiodes can work properly under reverse voltages of 60V in the DC circuit. Photodiodes require an electric potential of 1.3V in order to conduct current. Despite the absence of light input, a photodiode generates 2nA electrical current.
BPV23F Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 870nm ~ 1050nm
Viewing Angle: 120°
BPV23F Applications
There are a lot of Vishay Semiconductor Opto Division BPV23F Photodiodes applications.
- Infrared remote control
- Shaft encoders
- Pulse Oximetry
- YAG laser detection
- High speed photo detectors
- Sterilization Lamp Monitoring
- Heart Rate Monitoring
- Low Capacitance
- Industrial Automation
- Currency Validation