BPW20RF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Lensed Metal Can, 2 Lead |
| Number of Pins | 2 |
| Shape | ROUND |
| Semiconductor Material | Silicon |
| Operating Temperature | -40°C~125°C |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | HIGH SENSITIVITY |
| HTS Code | 8541.40.60.50 |
| Capacitance | 1.2nF |
| Subcategory | Photo Diodes |
| Max Power Dissipation | 300mW |
| Number of Functions | 1 |
| Configuration | SINGLE |
| Diode Type | PIN |
| Power Dissipation | 300mW |
| Viewing Angle | 100° |
| Forward Current | 50mA |
| Lens Style | Flat |
| Response Time | 3.4 μs |
| Breakdown Voltage | 10V |
| Size | 5.9mm |
| Rise Time | 3.4μs |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 3.7 μs |
| Max Reverse Voltage (DC) | 10V |
| Wavelength - Peak | 920 nm |
| Reverse Breakdown Voltage | 10V |
| Max Junction Temperature (Tj) | 125°C |
| Reverse Voltage (DC) | 10V |
| Ambient Temperature Range High | 125°C |
| Dark Current | 2nA |
| Spectral Range | 550nm ~ 1040nm |
| Active Area | 7.5mm2 |
| Infrared Range | YES |
| Light Current-Nom | 0.06mA |
| Height | 3.3mm |
| Length | 9.1mm |
| Width | 9.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BPW20RF Overview
The Bulk protects these photodiodes from damage. The photodiodes are put into Radial, Lensed Metal Can, 2 Lead packages for safety protection. Reverse-bias photodiodes should not be operated above 10V permanently. Photodiodes have a pin count of 2. During the operation of a circuit, photodiodes can release 300mW heat. A reverse anode voltage of 10V should be applied to the photodiodes. For a circuit, the maximum heat released by the photodiodes should be 300mW. If the reverse voltage is 10V, the photodiodes can operate properly in the DC circuit. Current should flow across a photodiode at 1.3V voltage. It's important to have 10V breakdown voltage to make photodiodes work. Even in the absence of light input, a photodiode occurs 2nA current.
BPW20RF Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~125°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 550nm ~ 1040nm
Response Time: 3.4 μs
Viewing Angle: 100°
BPW20RF Applications
There are a lot of Vishay Semiconductor Opto Division BPW20RF Photodiodes applications.
- Diode Laser Monitoring
- Vision Controls
- Electronic Equipment
- Shaft encoders
- Medical and Industrial
- Photo interrupters
- Low Capacitance
- Measurement Levelling
- Currency Validation
- Position sensing
