Parameters |
Ambient Temperature Range High |
125°C |
Dark Current |
2nA |
Spectral Range |
420nm ~ 675nm |
Active Area |
7.5mm2 |
Current - Dark (Typ) |
2nA |
Height |
3.3mm |
Length |
9.1mm |
Width |
9.1mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
PCB, Through Hole |
Mounting Type |
Through Hole |
Package / Case |
Radial, Lensed Metal Can, 2 Lead |
Number of Pins |
2 |
Operating Temperature |
-40°C~125°C |
Packaging |
Bulk |
Published |
1999 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Capacitance |
400pF |
Max Power Dissipation |
300mW |
Lead Length |
14.1mm |
Diode Type |
PIN |
Power Dissipation |
300mW |
Viewing Angle |
100° |
Forward Current |
50mA |
Lens Style |
Flat |
Response Time |
3.1 μs |
Voltage - DC Reverse (Vr) (Max) |
10V |
Breakdown Voltage |
10V |
Rise Time |
3.5μs |
Forward Voltage |
1.3V |
Fall Time (Typ) |
3 μs |
Max Reverse Voltage (DC) |
10V |
Reverse Breakdown Voltage |
10V |
Wavelength |
565nm |
Max Junction Temperature (Tj) |
125°C |
Peak Wavelength |
565 nm |
Reverse Voltage (DC) |
10V |
BPW21R Overview
As a protective measure, these photodiodes are packaged in the Bulk. Photodiodes are protected by Radial, Lensed Metal Can, 2 Lead packages in order to ensure their safety. Continuous reverse-bias means the photodiodes can withstand only 10V voltage. In reverse-bias mode, the voltage for the photodiodes should not exceed 10V continuously. Photodiodes have pins 2. In circuits containing photodiodes, 300mW heat may be released from the photodiodes. When photodiodes operate, they should not be subjected to temperatures higher than 125°C. But the photodiodes should operate at a temperature of -40°C. It is recommended that the reverse anode voltage on the photodiodes be 10V. In general, the maximum heat generated by photodiodes should be 300mW in a circuit. In the DC circuit, the photodiodes can function correctly with a reverse voltage of 10V. When current flows across a photodiode, it needs voltage 1.3V. Make sure photodiodes work with 10V breakdown voltage. It is possible for a photodiode to operate at 2nA current even if no light is provided.
BPW21R Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~125°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 420nm ~ 675nm
Response Time: 3.1 μs
Viewing Angle: 100°
BPW21R Applications
There are a lot of Vishay Semiconductor Opto Division BPW21R Photodiodes applications.
- Sterilization Lamp Monitoring
- Currency Validation
- Infrared remote control
- Health Monitoring
- Optical Switches
- Range finding
- Infrared data transmission
- Industrial Automation
- Pure UV-C Monitoring
- Solar Cells