BPW34B
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Number of Pins | 2 |
| Operating Temperature | -40°C~85°C |
| Packaging | Bulk |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 150mW |
| Diode Type | PIN |
| Power Dissipation | 150mW |
| Viewing Angle | 120° |
| Forward Current | 100mA |
| Response Time | 25ns |
| Voltage - DC Reverse (Vr) (Max) | 32V |
| Rise Time | 25ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 25 ns |
| Max Reverse Voltage (DC) | 32V |
| Reverse Breakdown Voltage | 32V |
| Wavelength | 850nm |
| Peak Wavelength | 850 nm |
| Reverse Voltage (DC) | 32V |
| Dark Current | 2nA |
| Spectral Range | 350nm ~ 1100nm |
| Active Area | 7.34mm2 |
| Current - Dark (Typ) | 2nA |
| Height | 2.2mm |
| Length | 4.5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
BPW34B Overview
As a protective measure, these photodiodes are packaged in the Bulk. To ensure safety, the photodiodes are packaged in DIP packages. A photodiode can withstand a maximum voltage of 32V if it is continuously reverse-biased. Continuous reverse-bias should not exceed 32V for the photodiodes. A photodiode is equipped with 2 pins. There is a possibility that the photodiodes could release 150mW heat within the circuit. During the operation of photodiodes, the temperature should not exceed 85°C. However, the minimum operating temperature for the photodiodes should be set at -40°C. Photodiodes should have a reverse anode voltage of 32V. Generally, the maximum amount of heat released by photodiodes is 150mW. It is possible for the photodiodes in the DC circuit to operate under reverse voltage of 32V. Photodiodes are supposed to operate at 1.3V voltage. When no light is input, a photodiode will conduct at 2nA current.
BPW34B Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~85°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 350nm ~ 1100nm
Response Time: 25ns
Viewing Angle: 120°
BPW34B Applications
There are a lot of OSRAM Opto Semiconductors Inc. BPW34B Photodiodes applications.
- High speed photo detector
- LiDAR
- Infrared data transmission
- Pulse Oximetry
- Sterilization Lamp Monitoring
- Health Monitoring
- High speed photo detectors
- Measurement Levelling
- Currency Validation
- Pure UV-C Monitoring
