BPW34FS
| Parameters | |
|---|---|
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2-SMD, Gull Wing |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Polarity | Reverse |
| Diode Type | PIN |
| Power Dissipation | 150mW |
| Viewing Angle | 120° |
| Response Time | 20ns |
| Voltage - DC Reverse (Vr) (Max) | 16V |
| Rise Time | 20ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 20 ns |
| Max Reverse Voltage (DC) | 16V |
| Reverse Breakdown Voltage | 32V |
| Wavelength | 950nm |
| Peak Wavelength | 850 nm |
| Dark Current | 2nA |
| Spectral Range | 780nm ~ 1100nm |
| Active Area | 7mm2 |
| Current - Dark (Typ) | 2nA |
| Height | 1.2mm |
| Length | 4.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
BPW34FS Overview
Photodiodes are protected from damage by the Tape & Reel (TR) package. It is necessary to place the photodiodes into 2-SMD, Gull Wing packages in order to protect them from damage. It is considered that the maximum voltage the photodiodes can withstand in reverse-bias mode is 16V. When the photodiodes are reverse-biased, the voltage should never exceed 16V. A photodiode is equipped with 2 pins. There was the possibility that photodiodes in a circuit would emit 150mW heat. In order for photodiodes to function, the temperature must not exceed 100°C. However, the photodiodes should be operated at a minimum temperature of -40°C. Photodiodes should have a reverse anode voltage of 32V. In order for current to flow across a photodiode, the voltage must be 1.3V. The photodiode operates at 2nA current even in the absence of light input.
BPW34FS Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 780nm ~ 1100nm
Response Time: 20ns
Viewing Angle: 120°
BPW34FS Applications
There are a lot of OSRAM Opto Semiconductors Inc. BPW34FS Photodiodes applications.
- Health Monitoring
- Sterilization Lamp Monitoring
- Light Bariers
- Photo interrupters
- Diode Laser Monitoring
- High speed photo detector
- Vision Controls
- Low Cost Light Monitoring
- Infrared remote control
- Shaft encoders
