BQ2000SN-B5
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2000 |
| Pin Count | 8 |
| Output Voltage | 4.4V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 4 |
| Switching Frequency | 300kHz |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Max Charge Current | 2A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
BQ2000SN-B5 Overview
There is a package called Tube that contains this item.A 8-SOIC (0.154, 3.90mm Width) package is included with this item as part of its contents.A Surface Mount mounting type is assigned to the device.To ensure reliable performance, the temperature should be set to -20°C~70°C TA.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you need Constant - Programmable current.Based on the base part number BQ2000, it is possible to find related parts for this device.There are 8 terminations in it.With 8 pins on it, it has a very simple design.Current, Timer, Voltage are a programmable feature.In order for the product to function as intended, there are 8 pins that must be connected.Channels are available in an amount of 1.In order to run it, you would need a battery with 5V.With a 6V supply voltage, it is capable of withstanding the operation of the device.The 4.4V output voltage allows for high efficiency.There is 2A output current when the device operates.The device you are looking at belongs to the subcategory of Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 4V.There is 1mA voltage set in Vsup (maximum supply voltage).5V is the power supply setting for the part.As far as the input voltage is concerned, it has a minimum of 4V volts.There is 500μA current flowing through the gadget's supply.For best efficiency, set the supply voltage to 5V.This part has a switching frequency of 300kHz and operates with this frequency.
BQ2000SN-B5 Features
1 channels
Power Management Circuits subcategory
Switching frequency of 300kHz
8-SOIC (0.154, 3.90mm Width) package
BQ2000SN-B5 Applications
There are a lot of Texas Instruments BQ2000SN-B5 Battery Chargers ICs applications.
- Military equipment
- Forklift
- Instruments and meters
- PDAs
- Solar charging
- Medical
- Robot
- Pallet jacks
- Drone
- Electric tour bus
