BQ2000TPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 33.594185mg |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BQ2000 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 4 |
| Switching Frequency | 300kHz |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2000TPW Overview
You can find it in the Tube package.There is a 8-TSSOP (0.173, 4.40mm Width) package that comes with this item.Device mounting type Surface Mount is specified.The best way to adjust the temperature is to set it to -20°C~70°C TA.It uses an analog integrated circuit of type POWER SUPPLY SUPPORT CIRCUIT.Charge the device with Constant - Programmable current.According to the base part number BQ2000, its related parts can be found.Among its terminations, there are 8.This board has 8 pins, making it very simple to construct.There are several programmable features, such as Current, Timer, Voltage.For it to work, 8 pins are required.There are a total of 1 channels available for use in this application.In theory, it should be able to run on a battery that has a voltage of 5VV.It is crucial that the supply voltage of the device does not exceed 6V for the device to work properly.There is 2A output current when the device operates.This device belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 4VV.In order to ensure optimum supply voltage, the maximum voltage setting is set to 1mA.The part's power supply is set to a value of 5V.Voltage input must be at least 4V volts.Supply current for the gadget is set to 500μA.It is recommended that the supply voltage be set to 5V for maximum efficiency.The part has 300kHz switching frequency.
BQ2000TPW Features
1 channels
Power Management Circuits subcategory
Switching frequency of 300kHz
8-TSSOP (0.173, 4.40mm Width) package
BQ2000TPW Applications
There are a lot of Texas Instruments BQ2000TPW Battery Chargers ICs applications.
- Truck dealers
- Solar charging
- Smart cameras
- GPS tracker
- Golf carts
- Automotive battery charger circuits
- Forklift
- Electricity bank
- Boat
- Electric pallet truck
