BQ2000TSN-B5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2000 |
| Pin Count | 8 |
| Output Voltage | 5.8V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 4 |
| Switching Frequency | 300kHz |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Max Charge Current | 2A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2000TSN-B5 Overview
This can be found in the Tube package.In order to make it more convenient, it has been included in the 8-SOIC (0.154, 3.90mm Width) package.Device mounting type Surface Mount is specified.It is best to set the temperature to -20°C~70°C TA.Using an analog IC of type POWER SUPPLY SUPPORT CIRCUIT, this device is able to communicate with the outside world.To charge the device, a current of Constant - Programmable is required.This part number BQ2000 can be used to find its related parts.In general, the number of terminations found within it is 8 as a whole.The device consists of 8 pins, which are arranged in a row.There are various programmable features, such as Current, Timer, Voltage.It operates on the basis of 8 pins.It appears that there are 1 channels available at this time.Batteries with a 5V voltage are compatible with it.With a 6V supply voltage, it is capable of withstanding the operation of the device.In the case of 5.8V, the output voltage is likely to produce high efficiency.The output current is set to 2A in this case.This device is classified as Power Management Circuits under the subcategory.A supply voltage of 4V is suitable for it, because it can operate with a low supply voltage.It was determined during the design process that Vsup (maximum supply voltage) should be set to 1mA.There is 5V power supply set for the part.It has a 4V volt minimum input voltage.There is 500μA current flowing through the gadget's supply.It is recommended to set the supply voltage to 5V in order to maximize the efficiency of the system.As far as switching frequency is concerned, the part runs at 300kHz.
BQ2000TSN-B5 Features
1 channels
Power Management Circuits subcategory
Switching frequency of 300kHz
8-SOIC (0.154, 3.90mm Width) package
BQ2000TSN-B5 Applications
There are a lot of Texas Instruments BQ2000TSN-B5 Battery Chargers ICs applications.
- Medical
- GPS tracker
- Remote control toys
- Electric lift car
- Emergency/Security
- Embedded automotive applications
- Automotive electronics
- Electric tour bus
- Electric pallet truck
- Marine buoy lights
