BQ2002CSNTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2002 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 2A |
| Adjustable Threshold | NO |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 0.5mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Programmable Features | Voltage |
| Current - Charging | Constant Pulsed |
| Battery Pack Voltage | 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2002CSNTR Overview
It is included in the Tape & Reel (TR) package. There is a 8-SOIC (0.154, 3.90mm Width) package included with this item that you will need to take care of.Mounting type is Surface Mount.It is recommended to set the temperature to 0°C~70°C TA for reliable performance.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.A charge of Constant Pulsed current is required to be applied to the device.A list of related parts can be found by searching for the base part number BQ2002.The number of terminations found in it is 8 as a whole.A battery pack is going to have a voltage of 2V.The device is equipped with a total of 8 pins.Among the programmable features are Voltage.It operates on the basis of 8 pins.Currently, there are a total of 1 channels available for use in the application.With 5V, you can use a battery to power it.A 6V supply voltage can be applied to it.The operation is carried out with an output current of 2A.Devices belonging to subcategory Power Management Circuits include this device.This device can work at as low a voltage as possible, such as 4V.In order to ensure optimum supply voltage, the maximum voltage setting is set to 0.5mA.The power supply for this part is set to 5V.There is a 4V volt minimum input voltage requirement.Its supply carries 500μA current.It is recommended that the supply voltage be set to 5V for maximum efficiency.
BQ2002CSNTR Features
Battery pack voltage of 2V
1 channels
Power Management Circuits subcategory
8-SOIC (0.154, 3.90mm Width) package
BQ2002CSNTR Applications
There are a lot of Texas Instruments BQ2002CSNTR Battery Chargers ICs applications.
- Drone
- GPS portable devices
- Automotive/electrical vehicle
- Various chargers
- Floor scrubber
- Robot
- Energy harvesting
- Personnel carriers
- Remote sensor
- Electric pallet truck
