BQ2002CSNTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2002 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 2A |
| Adjustable Threshold | NO |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 0.5mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Programmable Features | Voltage |
| Current - Charging | Constant Pulsed |
| Battery Pack Voltage | 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2002CSNTRG4 Overview
It is included in the Tape & Reel (TR) package for convenience.Located in package 8-SOIC (0.154, 3.90mm Width), it can be found there.Mounting type Surface Mount is chosen for the device.If you wish to ensure reliable performance, set the temperature to 0°C~70°C TA.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.To charge the device, there is a requirement for Constant Pulsed current.This device's related parts can be found under the base part number BQ2002.As a whole, it contains 8 terminations.It is 2V for the battery pack.Pins 8 are included.Features such as Voltage are programmable.In order for it to work, it requires 8 pins.Channels are available in an amount of 1.In theory, it should be able to run on a battery that has a voltage of 5VV.Applied input voltage of 6V does not damage the device.When the operation is completed, the output current is 2A.Subcategory 0 is home to this device.The device can operate at as low a supply voltage as possible, such as 4V.In order to ensure optimum supply voltage, the maximum voltage setting is set to 0.5mA.With respect to the power supply for the part, it is set to 5V.As far as the input voltage is concerned, it has a minimum of 4V volts.It is recommended to set the supply voltage to 5V in order to maximize the efficiency of the system.
BQ2002CSNTRG4 Features
Battery pack voltage of 2V
1 channels
Power Management Circuits subcategory
8-SOIC (0.154, 3.90mm Width) package
BQ2002CSNTRG4 Applications
There are a lot of Texas Instruments BQ2002CSNTRG4 Battery Chargers ICs applications.
- Electricity bank
- Electric pallet truck
- PDAs
- Remote sensor
- Solar charging
- Automotive electronics
- Electric lift car
- Modern LA
- Home routers
- Portable speaker systems
