Parameters |
Package / Case |
P |
Surface Mount |
NO |
Number of Pins |
8 |
Weight |
440.409842mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
THROUGH-HOLE |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
4V |
Current - Output |
2A |
Adjustable Threshold |
NO |
Min Input Voltage |
4V |
Supply Current-Max (Isup) |
0.5mA |
Nominal Input Voltage |
6V |
Height Seated (Max) |
4.57mm |
Length |
9.27mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
BQ2002GPNE4 Overview
The P package is suitable for it. Channels available are 1. It has a total of 8 pins. The minimum supply voltage for this part should not be less than 4V volts. 6V voltage greater than 6V volts should be supplied to this chip. Activation of this device requires a value greater than 0. A temperature below 70°C is suggested for use. There is a 5V volt power source. This device should always be set to 5V. It has 8 pins in total. There must be 0.5mA more than 0.5mA current available from the supply (Isup). It is specified that the operating supply voltage for this device is 5V. Input voltages below 4V can be used with the device.
BQ2002GPNE4 Features
Available in P Package
with 8 Pins
operate supply voltage at the range of 5V
BQ2002GPNE4 Applications
There are a lot of Texas Instruments BQ2002GPNE4 Battery Management ICs applications.
- On-board battery charger
- Rear light with animation
- ADAS sonar
- PV inverter
- Weather stations
- Base station RRH
- Park and garden
- Industrial machines
- Front light
- Industrial Lidar