BQ2002TPNE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output | 2A |
| Adjustable Threshold | NO |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 0.5mA |
| Nominal Input Voltage | 6V |
| Number of Cells | 1234 |
| Height Seated (Max) | 4.57mm |
| Length | 9.27mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
BQ2002TPNE4 Overview
The package PDIP is appropriate for battery instrument. This system battery uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. Channels available are 1. 8 pins are attached to it. Supply voltage should not fall below 4V volts for this electric component. This electrical component is from the Power Management Circuits family. A voltage of 6V volts is recommended for this power IC. You cannot activate this smart tools battery if it is less than 0°C. A temperature below 70°C is suggested for use. A 5V volt battery powers it. It is always recommended that this battery protection IC is set to 5V. In total, 8 pins can be found on it. Supply current (Isup) must not exceed 0.5mA. This power management IC's operating supply voltage is specified as being in the range of 5V. Input voltages below 4V can be used with the manage IC.
BQ2002TPNE4 Features
Available in PDIP Package
with 8 Pins
operate supply voltage at the range of 5V
BQ2002TPNE4 Applications
There are a lot of Texas Instruments BQ2002TPNE4 Battery Management ICs applications.
- PV inverter
- Electric street sweepers
- Sports cars
- Estimating the battery’s operational state
- Cell phone towers
- Golf carts
- Reporting operational status to external devices
- Robot vacuum cleaner
- Rear light with dynamic control
- Distributed energy resources
