BQ2002TSN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2002 |
| Pin Count | 8 |
| Output Voltage | 2V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 2A |
| Adjustable Threshold | NO |
| Max Output Voltage | 2V |
| Min Input Voltage | 4V |
| Max Input Voltage | 6V |
| Supply Current-Max (Isup) | 0.5mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Programmable Features | Voltage |
| Current - Charging | Constant Pulsed |
| Max Charge Current | 2A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2002TSN Overview
It comes in the package?of a Tube. In the package 8-SOIC (0.154, 3.90mm Width), there is a version of it.This device is mounted using type Surface Mount.It is recommended to set the temperature to 0°C~70°C TA for reliable performance.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The device requires Constant Pulsed current to charge.It is possible to find the related parts of this device by looking at its base part number BQ2002.It has a total of 8 terminations.This board has 8 pins, making it very simple to construct.Among the programmable features are Voltage.In order for the product to be functional, it requires that you connect the 8 pins according to the instructions.This application has a total of 1 channels that can be used.With 5V, you can use a battery to power it.This device can be operated at an input voltage of 6V without being damaged.When the output voltage is 2V, high efficiency is possible.With a 2A output current, the operation is conducted.Subcategory 0 is home to this device.Using a supply voltage as low as 4V will allow it to function.It is set to 0.5mA for Vsup (maximum supply voltage).5V is the power supply setting for the part.Voltage input must be at least 4V volts.It appears that there is 500μA current flowing through the supply of the gadget at the moment.Optimal efficiency requires a supply voltage of 5V.Input voltage is limited to 6V volts.It is required that a maximum supply voltage of 2V be applied as the output voltage for this operation.
BQ2002TSN Features
1 channels
Power Management Circuits subcategory
8-SOIC (0.154, 3.90mm Width) package
BQ2002TSN Applications
There are a lot of Texas Instruments BQ2002TSN Battery Chargers ICs applications.
- Home routers
- Rental fleets
- Drone
- Golf carts
- Floor scrubber
- Locomotive
- Battery backup applications
- Charging cradle for wearable devices
- Smart power strips
- Military equipment
