BQ2003PN-N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | BQ2003 |
| Pin Count | 16 |
| Output Voltage | 5.5V |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Operating Supply Current | 750μA |
| Output Current | 2A |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2.2mA |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | PUSH-PULL |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Switching Frequency | 300kHz |
| Programmable Features | Timer, Voltage |
| Current - Charging | Constant |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2003PN-N Overview
The package that has it is the Tube package.It comes as part of the 16-DIP (0.300, 7.62mm) package.It appears that the device's mounting type is Through Hole.Ideally, the temperature should be set to 0°C~70°C TA in order to ensure reliable performance.To operate the device, an analog IC called BATTERY CHARGE CONTROLLER is used.To charge the device, you will need to supply it with Constant of current.This part number BQ2003 can be used to find its related parts.It has 16 terminations.It is equipped with 16 pins.This device has a number of programmable features, including Timer, Voltage.There are 16 pins necessary to make it work.With a 5.5V supply voltage, it is capable of withstanding the operation of the device.In the case of 5.5V output voltage, there is a possibility of optimal efficiency.It is in this instance that the device's output current is set to 2A.This device can work at as low a voltage as possible, such as 4.5V.During the design process, Vsup (maximum supply voltage) was set to 2.2mA.There is a 4.5V volt minimum input voltage requirement.A 750μA supply current is set on the gadget.The device has 5V voltage input at the moment.For best results, set the supply voltage to 5V.There is 300kHz switching frequency for this part.
BQ2003PN-N Features
Switching frequency of 300kHz
16-DIP (0.300, 7.62mm) package
BQ2003PN-N Applications
There are a lot of Texas Instruments BQ2003PN-N Battery Chargers ICs applications.
- Smart power strips
- Marine buoy lights
- Energy harvesting
- Portable speaker systems
- Medical
- Automotive battery charger circuits
- Truck dealers
- Material handling
- Mobile point-of-sale (mPOS) terminals
- Mobile lighting
