BQ2003PNE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Current - Output | 2A |
| Voltage - Output | 5.5V |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2.2mA |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | PUSH-PULL |
| Number of Cells | 1234 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
BQ2003PNE4 Overview
The PDIP package is appropriate for it. This system battery uses an analog integrated circuit (IC) called BATTERY CHARGE CONTROLLER. There are 16 pins on it. It is recommended that this electric part's minimum supply voltage not be less than 4.5V volts. There should be 5.5V voltage over 5.5V volts on the supply to this electronic battery. In order for this system battery to be activated, its value cannot be less than 0. It is suggested that it be used at temperatures below 70°C. There are a total of 16 pins on it. There must be 2.2mA more than 2.2mA current available from the supply (Isup). The operating supply voltage for this power management IC is specified as 5V. The output voltage of the electronic battery is 5.5V. A voltage below 4.5V is suitable for running the power IC.
BQ2003PNE4 Features
Available in PDIP Package
with 16 Pins
BQ2003PNE4 Applications
There are a lot of Texas Instruments BQ2003PNE4 Battery Management ICs applications.
- Passenger boats
- TFT cluster
- Electric train traction batteries
- Continually optimizing battery performance
- LED lighting
- Main inverter
- Power tools
- Motor bikes
- Robot vacuum cleaner
- Sports cars
