BQ2031PN-A5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | BQ2031 |
| Pin Count | 16 |
| Output Voltage | 4.7V |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | SINGLE |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lead Acid |
| Number of Cells | 1 |
| Switching Frequency | 100kHz |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant Pulsed |
| Charge Current - Max | 5mA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2031PN-A5 Overview
It is included in the Tube package. It is contained in a package named 16-DIP (0.300, 7.62mm).This device has a mounting type of Through Hole.Keeping the temperature at -20°C~70°C TA is the right choice.This device makes use of an analog IC called BATTERY CHARGE CONTROLLER in order to provide its functionality.Charge the device by supplying it with Constant Pulsed current.Based on the base part number BQ2031, its related parts can be identified.As far as the terminations are concerned, there are 16.A total of 16 pins are present on it.Several programmable features, including Current, Timer, Voltage.When charging current is maximum, it is rated at 5mA.There are 16 pins necessary to make it work.The board is capable of handling a voltage input of zero volts.4.7V output voltages can result in high efficiency.In order to operate, an output current of 2A is used.It is capable of functioning at a voltage as low as possible, for example 4.5V voltage for this circuit is used.A minimum input voltage of 4.5V volts is required for this device.A 5V input voltage is applied to the device.The best efficiency can be achieved by setting the supply voltage to 5V.As far as switching frequency is concerned, the part runs at 100kHz.
BQ2031PN-A5 Features
Switching frequency of 100kHz
16-DIP (0.300, 7.62mm) package
BQ2031PN-A5 Applications
There are a lot of Texas Instruments BQ2031PN-A5 Battery Chargers ICs applications.
- Automotive/electrical vehicle
- Emergency/Security
- Rental fleets
- GPS tracker
- Conventional charge
- Tablets
- Electric tour bus
- Ruggedized notebooks/tablet computers
- Battery backup applications
- Solar charging
