BQ2054PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | BQ2054 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | PUSH-PULL |
| Fault Protection | Over Current, Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 234 |
| Switching Frequency | 100kHz |
| Current - Charging | Constant |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2054PN Overview
This can be found in the Tube package.To make it easier for you, it is included with the 16-DIP (0.300, 7.62mm) package.Mounting type Through Hole is chosen for the device.It is best to set the temperature to -20°C~70°C TA.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.Device charging requires Constant current.Parts related to the base part number BQ2054 can be found based on that number.In total, there are 16 terminations.It is equipped with 16 pins.The operation?are 16 pins.To ensure the device works properly, the supply voltage should not exceed 5.5V.The operation is carried out with an output current of 2A.The device can operate at as low a supply voltage as possible, such as 4.5V.Input voltage is limited to 4.5V volts at the lowest.Input voltage is 5V.For best results, set the supply voltage to 5V.In this particular part, the switching frequency is set to 100kHz.
BQ2054PN Features
Switching frequency of 100kHz
16-DIP (0.300, 7.62mm) package
BQ2054PN Applications
There are a lot of Texas Instruments BQ2054PN Battery Chargers ICs applications.
- Boat
- Remote powered communication and telemetry systems
- Ruggedized notebooks/tablet computers
- Drone
- GPS tracker
- Electronic dictionary
- Energy harvesting
- Industrial handhelds
- Wireless power
- Solar charging
