BQ24002PWPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BQ24002 |
| Pin Count | 20 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.5V |
| Nominal Input Voltage | 10V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant |
| Battery Pack Voltage | 4.2V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24002PWPG4 Overview
I found it in the Tube package, which comes with everything you need.In the package 20-PowerTSSOP (0.173, 4.40mm Width), there is a version of it.Device mounting type Surface Mount is specified.This is the right thing to do: set the temperature to -40°C~70°C TA.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.It is necessary to supply the device with Constant current in order to charge it.You can find this device's related parts by searching the base part number BQ24002.It has a total of 20 terminations.There is a voltage of 4.2V for the battery pack as well.It is equipped with 20 pins.In addition to the standard features, a number of programmable functions are available to the user, such as Current, Timer.For the product to work properly, 20 pins must be connected in order to make it work.In total, this application supports 1 channels.In order to run it, you would need a battery with 5V.It is crucial that the supply voltage of the device does not exceed 10V for the device to work properly.In the case of a 4.2V output voltage, high efficiency is possible.When the operation is completed, the output current is 1.2A.Using a supply voltage as low as 4.5V will allow it to function.It has a 4.5V volt minimum input voltage.In addition to the features above, the device can also generate the following features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE.
BQ24002PWPG4 Features
Battery pack voltage of 4.2V
1 channels
Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE
20-PowerTSSOP (0.173, 4.40mm Width) package
BQ24002PWPG4 Applications
There are a lot of Texas Instruments BQ24002PWPG4 Battery Chargers ICs applications.
- Electricity bank
- Fast charge
- Solar charging
- Digital camera
- Portable devices
- Industrial lighting
- Electronic dictionary
- Marine buoy lights
- Boat
- Tablets
