BQ24005PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BQ24005 |
| Pin Count | 20 |
| Output Voltage | 8.4V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.5V |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 10V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 2 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant |
| Battery Pack Voltage | 8.4V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24005PWPR Overview
It is included in the Tape & Reel (TR) package for convenience.There is a 20-PowerTSSOP (0.173, 4.40mm Width) package that comes with this item.There is a mounting type of Surface Mount for this device.Setting the temperature to -40°C~70°C TA is the right thing to do.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.To charge the device, Constant current is required.This device's related parts can be found under the base part number BQ24005.It contains 20 terminations, so that is how many there are.The battery pack is set to 8.4V when it comes to the battery.It has a total of 20 pins on it.The unit is equipped with a number of programmable features, including Current, Timer.It requires pins 20 to function.Channels are available in an amount of 1.A battery with 0V would be enough for it to run.An input voltage of 10V can be applied to the device without damage.As long as the output voltage is set to 8.4V, then there is a possibility of optimal efficiency being achieved.It is in this instance that the device's output current is set to 1.2A.There is a subcategory of Power Management Circuits for this device.At a low supply voltage, such as 4.5V, it can operate to the best of its ability.There is 1mA voltage set in Vsup (maximum supply voltage).Input voltage is limited to 4.5V volts at the lowest.In addition to the features above, the device can also generate the following features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE.
BQ24005PWPR Features
Battery pack voltage of 8.4V
1 channels
Power Management Circuits subcategory
Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE
20-PowerTSSOP (0.173, 4.40mm Width) package
BQ24005PWPR Applications
There are a lot of Texas Instruments BQ24005PWPR Battery Chargers ICs applications.
- Golf carts
- Model aircraft
- Electric lift car
- Home appliances
- Fast charge
- Mobile router
- Embedded automotive applications
- Trash compactors
- USB power delivery (USB-C) devices
- Remote sensor
