BQ24010DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 25.089328mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Series | bqTINY™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24010 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1A |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | NO |
| Min Input Voltage | 3V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16.5V |
| Fault Protection | Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24010DRCR Overview
You can find it in the Cut Tape (CT) package.There is currently a package available named 10-VFDFN Exposed Pad.In this case, the device has a mounting type of Surface Mount.Ideally, the temperature should be set to -40°C~125°C TJ in order to ensure reliable performance.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.Device charging requires Constant - Programmable current.Parts related to the base part number BQ24010 can be found based on that number.A total of 10 terminations can be found in it.Total number of pins: 10.It is possible to program features such as Current, Timer.In order to operate it, it has 10 pins.It is possible to use a total of 1 channels.There is a possibility that it can be powered by a 4.5V battery.As long as the supply voltage is 16.5V, it is capable of withstanding the voltage.The possibility of optimal efficiency exists if 4.2V output voltage is used as the output voltage.During operation, 1A represents the output current.Subcategory 0 is home to this device.It is capable of functioning at a voltage as low as possible, for example 3V voltage for this circuit is used.Vsup (maximum supply voltage) is set in the command to 5mA.The bqTINY? series includes this electrical component.Input voltage is limited to 3V volts at the lowest.It is important to note that during operation, the maximum output current is reduced to 1A.
BQ24010DRCR Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
BQ24010DRCR Applications
There are a lot of Texas Instruments BQ24010DRCR Battery Chargers ICs applications.
- Trash compactors
- Wireless headphones
- Rental fleets
- Drone
- Emergency/Security
- Personnel carriers
- Painting boat
- Smart cameras
- Remote sensor
- Electric boat
