BQ24013DRCRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 25.089328mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | bqTINY™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24013 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | NO |
| Min Input Voltage | 3V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16.5V |
| Fault Protection | Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24013DRCRG4 Overview
There is an Tape & Reel (TR) package that contains it. It comes as part of the 10-VFDFN Exposed Pad package.Amounting type Surface Mount is the one associated with the device.If you wish to ensure reliable performance, set the temperature to -40°C~125°C TJ.POWER SUPPLY SUPPORT CIRCUIT is the analog IC used in this device.Charge the device with Constant - Programmable current.There are related parts to this device according to the base part number BQ24013.The number of terminations found in it is 10 as a whole.There is 4.2V voltage in the battery pack.This board has 10 pins, making it very simple to construct.Features like Current, Timer can be programmed.For the product to work correctly, 10 pins are required, and a connection to each pin is required.The total number of channels that can be accessed by users is 1.Using a 4.5V battery should be enough to run it.A supply voltage of no more than 16.5V is required for the device to operate properly.Using a 4.2V output voltage results in high efficiency.Operation is done using a 1A output current.There is a subcategory of Power Management Circuits for this device.This device can work at as low a voltage as possible, such as 3V.5mA is set for Vsup (maximum supply voltage).In the bqTINY? series, this electrical component is found.It has a 3V volt minimum input voltage.
BQ24013DRCRG4 Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
BQ24013DRCRG4 Applications
There are a lot of Texas Instruments BQ24013DRCRG4 Battery Chargers ICs applications.
- Model aircraft
- Tablets
- Electrical Utility industry
- GPS portable devices
- Medical
- Personnel carriers
- Remote powered communication and telemetry systems
- Trash compactors
- Wireless headphones
- Automotive/electrical vehicle
