BQ24022DRCRG4
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 25.089328mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | bqTINY™-II |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24022 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1A |
| Number of Channels | 2 |
| Interface | USB |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | NO |
| Min Input Voltage | 4.5V |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 6.5V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 500mA |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
BQ24022DRCRG4 Overview
This can be found in the Tape & Reel (TR) package.Located in package 10-VFDFN Exposed Pad, it can be found there.The mounting type of the device is Surface Mount.The best thing to do is to set the temperature to -40°C~125°C TJ.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Charge the device with Constant - Programmable current.Based on the base part number BQ24022, it is possible to find related parts for this device.The overall number of terminations that can be found in it is 10 as a whole.Pins 10 are included.In addition to Current, Timer, there are several other programmable options.In its maximum charging mode, the part charges at 500mA.This product requires that a total of 10 pins be connected in order for it to work correctly.There are 2 channels available.Withstanding a voltage of 6.5V, it is a reliable piece of equipment.The possibility of optimal efficiency exists if 4.2V output voltage is used as the output voltage.During operation, 1A represents the output current.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.At a low supply voltage, such as 4.5V, it can operate to the best of its ability.2mA is set for Vsup (maximum supply voltage).There are several electrical components in the series bqTINY?-II.Voltage input must be at least 4.5V volts.It is important to note that during operation, the maximum output current is reduced to 1A.
BQ24022DRCRG4 Features
2 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
BQ24022DRCRG4 Applications
There are a lot of Texas Instruments BQ24022DRCRG4 Battery Chargers ICs applications.
- Smart cameras
- Industrial handhelds
- Pallet jacks
- Automotive battery charger circuits
- Maintenance shops
- GPS portable devices
- Marine buoy lights
- Mobile lighting
- Electric vehicles
- Golf carts
