BQ24031IRHLRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, bqTINY™ III |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BQ24031 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.1mV |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Output Current | 1.5A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.3V |
| Supply Current-Max (Isup) | 2mA |
| Fault Protection | Over Temperature, Reverse Current, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Ambient Temperature Range High | 85°C |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.1V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24031IRHLRQ1 Overview
This can be found in the Tape & Reel (TR) package.An included version of it is available in the package 20-VFQFN Exposed Pad.The device is mounted with mounting type Surface Mount.It is best to set the temperature to -40°C~85°C TA.To operate the device, an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT is used.If the device needs to be charged, it must be supplied with Constant - Programmable current.If you use the base part number BQ24031, you can look for related parts.The number of terminations found in it is 20 as a whole.A battery pack is going to have a voltage of 4.1V.This board has 20 pins, making it very simple to construct.Features such as Current, Timer are programmable.There are 20 pins necessary to make it work.Channels are available in a total of 1.It is important that the supply voltage does not exceed 16V for the device to work properly.The possibility of optimal efficiency exists if 4.1mV output voltage is used as the output voltage.It is performed with a current output of 1.5A for the output of the operation.There is one subcategory of this device, and it is Power Management Circuits.Using a supply voltage as low as 4.35V will allow it to function.There is 2mA voltage set in Vsup (maximum supply voltage).This electrical component is part of the Automotive, AEC-Q100, bqTINY? III series.There is a minimum input voltage of 4.3V volts.
BQ24031IRHLRQ1 Features
Battery pack voltage of 4.1V
1 channels
Power Management Circuits subcategory
20-VFQFN Exposed Pad package
BQ24031IRHLRQ1 Applications
There are a lot of Texas Instruments BQ24031IRHLRQ1 Battery Chargers ICs applications.
- Battery backup applications
- Maintenance shops
- Fast charge
- Personnel carriers
- GPS tracker
- Drone
- Material handling
- Pallet jacks
- Military equipment
- Opportunity charge
