BQ24070RHLT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24070 |
| Pin Count | 20 |
| Output Voltage | 4.4V |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.3V |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 16V |
| Fault Protection | Over Temperature, Reverse Current, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.5A |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24070RHLT Overview
If you are looking for it in the Tape & Reel (TR) package, then you have found it.The product comes in the package of a 20-VFQFN Exposed Pad.Mounting type Surface Mount matches the device.A temperature setting of -40°C~125°C TJ would be the best thing to do.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.If the device needs to be charged, it must be supplied with Constant - Programmable current.According to the base part number BQ24070, its related parts can be found.20 terminations are present.It is a 4.2V voltage for the battery pack.In addition, it is equipped with 20 pins.Current, Timer, for example, can be programmed.On the device, there is 1.5A maximum charging current listed.There are 20 pins required in order for the product to function.A total of 1 channels are available for use.With a 16V supply voltage, it is capable of withstanding the operation of the device.Ideally, when the output voltage of the device is set to 4.4V, you will be able to achieve the highest degree of efficiency.During operation, 1A represents the output current.Devices in this category are classified as Power Management Circuits.This device can work at as low a voltage as possible, such as 4.35V.Vsup (maximum supply voltage) is set to 2mA.A minimum input voltage of 4.3V volts is required for this device.
BQ24070RHLT Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
20-VFQFN Exposed Pad package
BQ24070RHLT Applications
There are a lot of Texas Instruments BQ24070RHLT Battery Chargers ICs applications.
- Remote control toys
- Medical
- Painting boat
- Instruments and meters
- Locomotive
- Rental fleets
- Conventional charge
- Home routers
- Golf carts
- Portable devices
