BQ24075RGTT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24075 |
| Pin Count | 16 |
| Output Voltage | 4.2V |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/6.3V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6.4V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.5A |
| Adjustable Threshold | YES |
| Max Output Voltage | 5.6V |
| Min Input Voltage | 4.3V |
| Max Input Voltage | 26V |
| Nominal Input Voltage | 6.4V |
| Min Output Voltage | 5.4V |
| Threshold Voltage | 6.6 |
| Fault Protection | Over Temperature, Over Voltage, Reverse Current, Short Circuit |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24075RGTT Overview
It is included in the Tape & Reel (TR) package for convenience.It comes as part of the 16-VFQFN Exposed Pad package.This device has a mounting type of Surface Mount.The best thing to do is to set the temperature to -40°C~125°C TJ.POWER SUPPLY SUPPORT CIRCUIT is the analog IC used in this device.To charge the device, Constant - Programmable current is required.The base part number BQ24075 can be used to locate related parts for this device.There are 16 terminations in it.Batteries pack have 4.2V.Due to the 16 pins on it, it is a very simple circuit.Features such as Current, Timer are programmable.It is necessary to connect the 16 pins during the installation process of this product.In total, this application supports 1 channels.A battery with 0V would be enough for it to run.This device can be operated at an input voltage of 6.4V without being damaged.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.During operation, 1.5A represents the output current.This device is a member of subcategory Power Management Circuits.This circuit can function at a low supply voltage, such as 4.35VV.The part's power supply is set to 4.5/6.3V.Input voltage minimum is 4.3V volts, which is a requirement of the device.This device can accept up to 26V volts of input voltage.During this operation, the maximum output supply voltage should be 5.6V.During operation, the maximum output current is reduced to 4.5A.
BQ24075RGTT Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
16-VFQFN Exposed Pad package
BQ24075RGTT Applications
There are a lot of Texas Instruments BQ24075RGTT Battery Chargers ICs applications.
- Floor scrubber
- Electronic dictionary
- Military equipment
- GPS tracker
- Truck dealers
- Automotive battery charger circuits
- Laptops
- Model aircraft
- Painting boat
- Industrial handhelds
