BQ24086DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24086 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 3.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.3V |
| Supply Current-Max (Isup) | 6mA |
| Nominal Input Voltage | 6.5V |
| Threshold Voltage | 6.5 |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24086DRCR Overview
It is contained in the package Tape & Reel (TR).The package 10-VFDFN Exposed Pad includes a version of it.Surface Mount is the mounting type of the device.This is the right thing to do: set the temperature to 0°C~125°C TJ.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.The device requires Constant - Programmable current to charge.It is possible to find the related parts to the base part number BQ24086.In general, the number of terminations found within it is 10 as a whole.It is a 4.2V voltage for the battery pack.There are 10 pins on it.It is possible to program features such as Timer.It operates on the basis of 10 pins.There are 1 channels available for this application.Batteries with 4.5V can be used to power it.With a 6.5V supply voltage, it is capable of withstanding the operation of the device.When the output voltage is 4.2V, high efficiency is possible.When the operation is completed, the output current is 750mA.The device falls under the Power Management Circuits subcategory.It can function at as low a supply voltage as possible, such as 3.5V.In order to ensure optimum supply voltage, the maximum voltage setting is set to 6mA.It has a 4.3V volt minimum input voltage.
BQ24086DRCR Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
BQ24086DRCR Applications
There are a lot of Texas Instruments BQ24086DRCR Battery Chargers ICs applications.
- Personnel carriers
- Wireless power
- Automotive electronics
- Fleet management
- Electricity bank
- Automotive/electrical vehicle
- Mobile point-of-sale (mPOS) terminals
- High end, feature-rich consumer
- Tablets
- Portable medical instruments
