BQ24088DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24088 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 3.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.2V |
| Min Input Voltage | 4.3V |
| Max Input Voltage | 18V |
| Supply Current-Max (Isup) | 6mA |
| Nominal Input Voltage | 6.5V |
| Threshold Voltage | 10.5 |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 750mA |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24088DRCT Overview
There is a version of it included in the package Tape & Reel (TR).We've included it in the 10-VFDFN Exposed Pad package so that it's easier to use.This device is mounted using type Surface Mount.Temperature 0°C~125°C TJ is recommended for reliable performance.A analog IC of POWER SUPPLY SUPPORT CIRCUIT has been used in the design of this device.If the device needs to be charged, it must be supplied with Constant - Programmable current.It is possible to find the related parts to the base part number BQ24088.There are no terminations in it at all.It is equipped with 10 pins.There are several programmable features, such as Timer.When charged at its maximum current, the device is rated at 750mA.Product functionality is dependent on 10 pins.A total of 1 channels are available for use.There is a possibility that it can be powered by a 4.5V battery.An input voltage that is equal to 6.5V can be applied to it without any problem.It is possible to achieve high efficiency by using an output voltage of 4.2V.Operation is done using a 750mA output current.Devices belonging to subcategory Power Management Circuits include this device.It is capable of functioning at a voltage as low as possible, for example 3.5V voltage for this circuit is used.Vsup (maximum supply voltage) is set to 6mA.Input voltage minimum is 4.3V volts, which is a requirement of the device.This device can accept voltages up to 0 volts as an input voltage.This operation requires a voltage of 4.2V as the maximum output supply voltage.
BQ24088DRCT Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
BQ24088DRCT Applications
There are a lot of Texas Instruments BQ24088DRCT Battery Chargers ICs applications.
- Boat
- Charging cradle for wearable devices
- Automotive/electrical vehicle
- Industrial lighting
- Floor scrubber
- Remote powered communication and telemetry systems
- GPS tracker
- Industrial
- Robot
- Trash compactors
