BQ24105IRHLRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, bqSWITCHER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BQ24105 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 2A |
| Adjustable Threshold | NO |
| Min Input Voltage | 4.3V |
| Supply Current-Max (Isup) | 5mA |
| Threshold Voltage | +3.3V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 ~ 3 |
| Switching Frequency | 1.1MHz |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 12.6V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24105IRHLRQ1 Overview
It is contained in the package Tape & Reel (TR).There is a 20-VFQFN Exposed Pad package included with this item that you will need to take care of.The mounting type of the device is Surface Mount.If you wish to ensure reliable performance, set the temperature to -40°C~85°C TA.In order to provide its functionality, this device uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you need Constant - Programmable current.If you use the base part number BQ24105, you can look for related parts.It contains a total of 20 terminations.It is a 12.6V voltage for the battery pack.With 20 pins on it, it has a very simple design.The unit is equipped with a number of programmable features, including Current, Timer.During the installation process, this product requires the connection of 20 pins.In total, this application supports 4 channels.The board is capable of handling a voltage input of zero volts.There is 2A output current when the device operates.There is one subcategory of this device, and it is Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 4.35V voltage for this circuit is used.During the design process, Vsup (maximum supply voltage) was set to 5mA.Automotive, AEC-Q100, bqSWITCHER? is the series number of this electrical component.It has a 4.3V volt minimum input voltage.A switching frequency of 1.1MHz is present in the part.
BQ24105IRHLRQ1 Features
Battery pack voltage of 12.6V
4 channels
Power Management Circuits subcategory
Switching frequency of 1.1MHz
20-VFQFN Exposed Pad package
BQ24105IRHLRQ1 Applications
There are a lot of Texas Instruments BQ24105IRHLRQ1 Battery Chargers ICs applications.
- Automotive electronics
- Automotive battery charger circuits
- Rental fleets
- Remote powered communication and telemetry systems
- Pallet jacks
- Solar charging
- Robot
- Tablets
- Painting boat
- Electricity bank
