BQ24115RHLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | bqSWITCHER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24115 |
| Pin Count | 20 |
| Output Voltage | 15.5V |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
| Min Input Voltage | 4.3V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16V |
| Switcher Configuration | BUCK |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 3 |
| Switching Frequency | 1.1MHz |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 15.5V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24115RHLR Overview
In the Cut Tape (CT) package, you will find it.For convenience, it is included in the 20-VFQFN Exposed Pad package.The mounting type of the device is Surface Mount.The correct temperature setting is -40°C~85°C TA.There is an analog IC of BATTERY CHARGE CONTROLLER used in this device.For the device to be charged, there is Constant - Programmable current required.If you use the base part number BQ24115, you can look for related parts.Among its terminations, there are 20.A battery pack is going to have a voltage of 15.5V.There are 20 pins on the circuit board.This feature allows for programmability, such as Current, Timer.Product functionality is dependent on 20 pins.An input voltage that is equal to 16V can be applied to it without any problem.15.5V output voltages can result in high efficiency.In order to operate, an output current of 2A is used.This device can work at as low a voltage as possible, such as 4.35V.In most cases, the maximum supply voltage (Vsup) is set to 5mA.Electric components from the bqSWITCHER? series are included in this package.Input voltage minimum is 4.3V volts, which is a requirement of the device.There is 1.1MHz switching frequency for this part.
BQ24115RHLR Features
Battery pack voltage of 15.5V
Switching frequency of 1.1MHz
20-VFQFN Exposed Pad package
BQ24115RHLR Applications
There are a lot of Texas Instruments BQ24115RHLR Battery Chargers ICs applications.
- Shop charger
- Various chargers
- Personnel carriers
- Boat
- Electric lift car
- Tablets
- Crosswalk marker lights
- Smart cameras
- Industrial handhelds
- Wearables
