BQ24152YFFT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | BQ24152 |
| Pin Count | 20 |
| Output Voltage | 4.44V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 6V |
| Threshold Voltage | +3.3V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 3MHz |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.25A |
| Battery Pack Voltage | 4.44V Max |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24152YFFT Overview
It is included in the Tape & Reel (TR) package for convenience.Located in package 20-UFBGA, DSBGA, it can be found there.Surface Mount is the mounting type of the device.It is best to set the temperature to -40°C~85°C TA in order to prevent the system from overheating.This device makes use of an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT in order to provide its functionality.To charge the device, you need Constant - Programmable current.There are related parts to this device according to the base part number BQ24152.A total of 20 terminations can be found in it.For the battery pack, it is 4.44V Max.There are 20 pins on it.A number of programmable features are available, including Current, Timer, Voltage.According to the specifications, it should be rated at 1.25A when charging at maximum power.In order for the product to function as intended, there are 20 pins that must be connected.The number of available channels is 1.A 5V battery should be sufficient.Applied input voltage of 6V does not damage the device.Using a 4.44V output voltage results in high efficiency.It is in this instance that the device's output current is set to 1.2A.This device belongs to the subcategory of Power Management Circuits.This device can work at as low a voltage as possible, such as 4V.In order to ensure optimum supply voltage, the maximum voltage setting is set to 5mA.The power supply for this part is set to 5V.It has a 4V volt minimum input voltage.In this particular part, the switching frequency is set to 3MHz.
BQ24152YFFT Features
Battery pack voltage of 4.44V Max
1 channels
Power Management Circuits subcategory
Switching frequency of 3MHz
20-UFBGA, DSBGA package
BQ24152YFFT Applications
There are a lot of Texas Instruments BQ24152YFFT Battery Chargers ICs applications.
- Charging cradle for wearable devices
- Remote powered communication and telemetry systems
- PDAs
- Fast charge
- TV sticks
- Wireless power
- Various chargers
- Forklift
- Mobile router
- Man lift
