BQ24163RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 54.601182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24163 |
| Pin Count | 24 |
| Output Voltage | 4.44V |
| Max Output Current | 3A |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 2.5A |
| Output Current | 2.5A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.44V |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 10V |
| Min Output Voltage | 3.5V |
| Threshold Voltage | +3.8V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 3.4V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24163RGET Overview
It is contained in the package Tape & Reel (TR).It comes as part of the 24-VFQFN Exposed Pad package.This device has a mounting type of Surface Mount.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.There is an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT used in this device.If the device needs to be charged, it must be supplied with Constant - Programmable current.Identify its related parts based on the base part number BQ24163.24 terminations are present.A battery pack is going to have a voltage of 3.4V.The device has 24 pins in total.For the product to work properly, 24 pins must be connected in order to make it work.There are a total of 1 channels available for your use.It should be possible to run it from a 5V battery it should be able to run at all times.This device can be operated at an input voltage of 10V without being damaged.High efficiency can be achieved with a 4.44V output voltage.In order to operate, it must have a current of 2.5A at the output.This device is classified as Power Management Circuits under the subcategory.Using a supply voltage as low as 4.2V will allow it to function.5mA is set for Vsup (maximum supply voltage).Input voltage minimum is 4V volts, which is a requirement of the device.Its supply carries 2.5A current.1.5MHz is the switching frequency of the part.It is mandatory to set the voltage at 4.44V for the maximum output supply voltage for this operation.In order to comply with the constraints, the maximum output current is reduced to 3A.
BQ24163RGET Features
Battery pack voltage of 3.4V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
24-VFQFN Exposed Pad package
BQ24163RGET Applications
There are a lot of Texas Instruments BQ24163RGET Battery Chargers ICs applications.
- Mobile point-of-sale (mPOS) terminals
- Solar charging
- Tablets
- Truck dealers
- Trash compactors
- Electric lift car
- Remote powered communication and telemetry systems
- GPS portable devices
- Electric tour bus
- Boat
