BQ24168RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Weight | 54.601182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24168 |
| Pin Count | 24 |
| Output Voltage | 4.44V |
| Max Output Current | 3A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 2.5A |
| Output Current | 2.5A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.44V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 10V |
| Min Output Voltage | 3.5V |
| Threshold Voltage | +3.8V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 3.7V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24168RGET Overview
It is contained in the package Tape & Reel (TR).There is currently a package available named 24-VFQFN Exposed Pad.It appears that the device's mounting type is Surface Mount.Ideally, the temperature should be set to -40°C~85°C TA in order to ensure reliable performance.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.Charge the device with Constant - Programmable current.Identify its related parts based on the base part number BQ24168.It has a total of 24 terminations.In the case of the battery pack, it is 3.7V.The device has a total of 24 pins.Product functionality is dependent on 24 pins.It is possible to use a total of 1 channels.Power can be provided by a battery with 5V.It is capable of withstanding a 6V supply voltage.When the output voltage is 4.44V, high efficiency is possible.Operation is achieved by providing a 2.5A output current.Devices in this category are classified as Power Management Circuits.The device can operate at a voltage of 4.2V as low as possible.In order to mount it, it has to align itself with Surface Mount.It is configured to be 5mA for Vsup (maximum supply voltage).A power supply setting of 0 has been assigned to the part.Current is flowing through the gadget's supply at 2.5A volts.With 1.5MHz switching frequency, the part operates.In order for the operation to be carried out successfully, a maximum output supply voltage of 4.44V is required.To meet operation conditions, the maximum output current is reduced to 3A.
BQ24168RGET Features
Battery pack voltage of 3.7V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
24-VFQFN Exposed Pad package
BQ24168RGET Applications
There are a lot of Texas Instruments BQ24168RGET Battery Chargers ICs applications.
- Mobile point-of-sale (mPOS) terminals
- Painting boat
- Digital camera
- USB power delivery (USB-C) devices
- GPS tracker
- Modern LA
- Automotive battery charger circuits
- Battery backup applications
- Emergency/Security
- Electric pallet truck
