BQ24168YFFR
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 49-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 49 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 49 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | BQ24168 |
| Pin Count | 49 |
| Output Voltage | 4.44V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4.2V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 2.5A |
| Output Current | 2.5A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 5mA |
| Threshold Voltage | +3.8V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 3.7V |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 425μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
BQ24168YFFR Overview
It is available in the package Digi-Reel?.It is contained in a package named 49-UFBGA, DSBGA.There is a mounting type Surface Mount specified for the device.Keeping the temperature at -40°C~85°C TA will ensure reliable performance.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.Device charging requires Constant - Programmable current.There are related parts for this device under the base part number BQ24168.I have found that the number of terminations found in it as a whole is 49.It is a 3.7V voltage for the battery pack.49 pins are attached to it.During the installation process, this product requires the connection of 49 pins.The total number of channels that can be accessed by users is 1.A battery with 0V would be enough for it to run.The device can withstand a supply voltage of 6V.There is a possibility of high efficiency if the output voltage is set to 4.44V.The output current is set to 2.5A in this case.This device is a member of subcategory Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 4.2V voltage for this circuit is used.Vsup (maximum supply voltage) is set in the command to 5mA.The power supply for this part is set to 5V.Input voltage must be at least 4V volts in order to function.Supply current for the gadget is set to 2.5A.As far as switching frequency is concerned, the part runs at 1.5MHz.
BQ24168YFFR Features
Battery pack voltage of 3.7V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
49-UFBGA, DSBGA package
BQ24168YFFR Applications
There are a lot of Texas Instruments BQ24168YFFR Battery Chargers ICs applications.
- Smart speakers
- Forklift
- Charging cradle for wearable devices
- Fast charge
- Remote sensor
- Marine buoy lights
- Painting boat
- Modern LA
- Digital camera
- Robot
