BQ24200DGNRG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 13.5V |
| Min Supply Voltage | 2.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output | 500mA |
| Adjustable Threshold | NO |
| Voltage - Output | 4.1V |
| Min Input Voltage | 2.8V |
| Supply Current-Max (Isup) | 2.5mA |
| Nominal Input Voltage | 13.5V |
| Height Seated (Max) | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
BQ24200DGNRG4 Overview
The HTSSOP EP package is appropriate for it. This device uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. Channels available are 1. 8 pins are attached to it. The package contains a Tape & Reel (TR) case. Supply voltage should not fall below 2.8V volts for this part. Electrical components in the Power Management Circuits family are found here. There should be 13.5V voltage over 13.5V volts on the supply to this chip. You cannot activate this device if it is less than -40°C. A temperature below 125°C is suggested for use. In total, it has 8 pins. OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE can be discovered in the device when using it. Unless specified otherwise, Isup (the maximum supply current) must not exceed 2.5mA. The output voltage is 4.1V. Input voltages below 2.8V are suitable for the device.
BQ24200DGNRG4 Features
Available in HTSSOP EP Package
with 8 Pins
BQ24200DGNRG4 Applications
There are a lot of Texas Instruments BQ24200DGNRG4 Battery Management ICs applications.
- ADAS radar
- Smart speaker / portable audio
- PV timeshift
- Grid support
- DC/DC converter
- Buses
- Golf cars
- Estimating the battery’s operational state
- 3-wheelers
- Electric compressor
