BQ24201DGNG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Max Supply Voltage | 13.5V |
| Min Supply Voltage | 2.8V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output | 500mA |
| Adjustable Threshold | NO |
| Voltage - Output | 4.1V |
| Min Input Voltage | 2.8V |
| Supply Current-Max (Isup) | 2.5mA |
| Nominal Input Voltage | 13.5V |
| Height Seated (Max) | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
BQ24201DGNG4 Overview
For package HTSSOP EP, it is appropriate. This system battery uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. We have 1 channels available. The total number of pins is 8. There should be a minimum supply voltage of 2.8V volts for this electrical part. This electrical component is from the Power Management Circuits family. It is recommended that the power management IC's supply voltage is 13.5V higher than 13.5V volts. It must be greater than -40°C to activate this system battery. Using it below 125°C temperatures is recommended. There are a total of 8 pins on it. With this power management IC, it is possible to discover OPTIONAL TEMPERATURE MONITORING BEFORE AND DURING CHARGE. Unless specified otherwise, Isup (the maximum supply current) must not exceed 2.5mA. A voltage of 4.1V is output by the electronic battery. There is 2.8V voltage limit on the battery protector ic, so it can operate below 2.8V.
BQ24201DGNG4 Features
Available in HTSSOP EP Package
with 8 Pins
BQ24201DGNG4 Applications
There are a lot of Texas Instruments BQ24201DGNG4 Battery Management ICs applications.
- Body control module
- Fork lifts
- Passenger cars
- Industrial Lidar
- Motor drive - 3 phase AC100V-240V AC servo
- Leisure
- Continually optimizing battery performance
- Industrial drones
- Rear light with dynamic control
- A/C power substations
