BQ24230RGTT
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24230 |
| Pin Count | 16 |
| Output Voltage | 4.4V |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6.4V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 500mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.4V |
| Min Input Voltage | 4.3V |
| Max Input Voltage | 26V |
| Nominal Input Voltage | 6.4V |
| Threshold Voltage | +3.3V |
| Fault Protection | Over Temperature, Over Voltage, Reverse Current, Short Circuit |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Programmable Features | Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
BQ24230RGTT Overview
The package Tape & Reel (TR) contains it, and you can find it there.The package that is included with it comes in the shape of a 16-VFQFN Exposed Pad.This device is mounted using type Surface Mount.It is best to set the temperature to -40°C~125°C TJ in order to prevent the system from overheating.It functions by using an analog IC called POWER SUPPLY SUPPORT CIRCUIT.To charge the device, Constant - Programmable current is required.The related parts of the base part number BQ24230 can be found by following the order of the base part number.As far as the terminations are concerned, there are 16.There is a voltage of 4.2V for the battery pack as well.The device is equipped with a total of 16 pins.Among the programmable features are Timer.It is necessary to connect the 16 pins during the installation process of this product.In total, this application supports 1 channels.It should be possible to run it from a 5V battery it should be able to run at all times.With a 6.4V supply voltage, it is capable of withstanding the operation of the device.As long as the output voltage is set to 4.4V, then there is a possibility of optimal efficiency being achieved.The output current is set to 500mA in this case.This device belongs to the subcategory of Power Management Circuits.At a low supply voltage, such as 4.35V, it can operate to the best of its ability.The part's power supply is set to a value of 5V.Input voltage is limited to 4.3V volts at the lowest.A maximum input voltage of 26V volts can be applied to it.It is important to note that the maximum output supply voltage for this operation must be set to 4.4V.A reduction in maximum output current to 1.5A occurs during operation.
BQ24230RGTT Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
16-VFQFN Exposed Pad package
BQ24230RGTT Applications
There are a lot of Texas Instruments BQ24230RGTT Battery Chargers ICs applications.
- Personnel carriers
- Wireless power
- PDAs
- Electric pallet truck
- Industrial
- Electronic dictionary
- Smart power strips
- Opportunity charge
- Boat
- Portable speaker systems
