BQ24250RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24250 |
| Output Voltage | 4.44V |
| Max Output Current | 4A |
| Interface | I2C |
| Max Supply Voltage | 10.5V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 2A |
| Nominal Supply Current | 2A |
| Output Current | 2A |
| Max Output Voltage | 4.2V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 10.5V |
| Threshold Voltage | +3.35V |
| Fault Protection | Over Current, Over Temperature, Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Max Junction Temperature (Tj) | 125°C |
| Switching Frequency | 3kHz |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24250RGET Overview
The package Tape & Reel (TR) contains it, and you can find it there.It is contained in a package named 24-VFQFN Exposed Pad.It appears that the device's mounting type is Surface Mount.The correct temperature setting is -40°C~85°C TA.A analog IC of POWER SUPPLY MANAGEMENT CIRCUIT has been used in the design of this device.A charge of Constant - Programmable current is required to be applied to the device.Identify its related parts based on the base part number BQ24250.It contains 24 terminations.Features like Current can be programmed.Product functionality is dependent on 24 pins.A supply voltage of no more than 10.5V is required for the device to operate properly.Ideally, when the output voltage of the device is set to 4.44V, you will be able to achieve the highest degree of efficiency.There is a constant output current of 2A when it is operating.Subcategory 0 is home to this device.It is capable of functioning at a voltage as low as possible, for example 4.35V voltage for this circuit is used.A mounting requires that it align itself with Surface Mount.It is set to 5mA for Vsup (maximum supply voltage).This gadget's power supply has a current of 2A flowing through it.A switching frequency of 3kHz is present in the part.It is mandatory to set the voltage at 4.2V for the maximum output supply voltage for this operation.A reduction in maximum output current to 4A occurs during operation.
BQ24250RGET Features
Power Management Circuits subcategory
Switching frequency of 3kHz
24-VFQFN Exposed Pad package
BQ24250RGET Applications
There are a lot of Texas Instruments BQ24250RGET Battery Chargers ICs applications.
- Tablets
- Embedded automotive applications
- Military equipment
- Mobile router
- High end, feature-rich consumer
- Industrial
- Portable devices
- Automotive/electrical vehicle
- Electronic dictionary
- Ruggedized notebooks/tablet computers
