BQ24253RGET
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24253 |
| Output Voltage | 4.44V |
| Max Output Current | 4A |
| Interface | I2C |
| Max Supply Voltage | 10.5V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 13mA |
| Output Current | 2A |
| Max Output Voltage | 4.2V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 18V |
| Threshold Voltage | +3.35V |
| Fault Protection | Over Current, Over Temperature, Over Voltage |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Max Junction Temperature (Tj) | 125°C |
| Switching Frequency | 3kHz |
| Voltage - Supply (Max) | 10.5V |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
BQ24253RGET Overview
It is contained in the package Cut Tape (CT).Among the packages that come with this product, there is one that is 24-VFQFN Exposed Pad.Amounting type Surface Mount is the one associated with the device.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.Using an analog IC of type POWER SUPPLY MANAGEMENT CIRCUIT, this device is able to communicate with the outside world.In order to charge the device, it needs to receive Constant - Programmable current.Parts related to the base part number BQ24253 can be found based on that number.24 terminations are present.There are various programmable features, such as Current.It is necessary to connect the 24 pins during the installation process of this product.Devices with a maximum supply voltage of 10.5V are preferred.It is crucial that the supply voltage of the device does not exceed 10.5V for the device to work properly.The possibility of optimal efficiency exists if 4.44V output voltage is used as the output voltage.It is performed with a current output of 2A for the output of the operation.Devices belonging to subcategory Power Management Circuits include this device.Using a supply voltage as low as 4.35V will allow it to function.It is mounted in the same way as Surface Mount.5mA is set for Vsup (maximum supply voltage).This gadget's power supply has a current of 13mA flowing through it.This part has a switching frequency of 3kHz and operates with this frequency.It is required that a maximum supply voltage of 4.2V be applied as the output voltage for this operation.To meet operation conditions, the maximum output current is reduced to 4A.
BQ24253RGET Features
Power Management Circuits subcategory
Switching frequency of 3kHz
24-VFQFN Exposed Pad package
BQ24253RGET Applications
There are a lot of Texas Instruments BQ24253RGET Battery Chargers ICs applications.
- Electric pallet truck
- Marine buoy lights
- Mobile point-of-sale (mPOS) terminals
- Man lift
- Opportunity charge
- Industrial
- Shop charger
- GPS tracker
- Solar charging
- Automotive battery charger circuits
