BQ24296RGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Weight | 54.601182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BQ24296 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 6.2V |
| Min Supply Voltage | 3.9V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Output Current | 3A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 3000mA |
| Threshold Voltage | +6.4V |
| Fault Protection | Over Current, Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Ambient Temperature Range High | 85°C |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24296RGER Overview
You can find it in the Tape & Reel (TR) package.The product comes in the package of a 24-VFQFN Exposed Pad.Mounting type Surface Mount matches the device.This is the right thing to do: set the temperature to -40°C~85°C TA.Analog IC POWER SUPPLY MANAGEMENT CIRCUIT is responsible for implementing the device.The device requires Constant - Programmable of current to charge.It is possible to find the related parts to the base part number BQ24296.There are no terminations in it at all.The battery pack has 4.2V.In order for it to work, it requires 24 pins.The number of channels available is 1.A battery with 0V would be enough for it to run.If the supply voltage exceeds 6.2V, the device will not function properly.Using a 5.5V output voltage results in high efficiency.In order to operate, it must have a current of 3A at the output.The device you are looking at belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 3.9VV.In terms of the mounting, it is mounted in the way indicated by Surface Mount as far as the mounting is concerned.It is configured to be 3000mA for Vsup (maximum supply voltage).Optimal performance can be achieved by setting the supply voltage to 6V.This part has a switching frequency of 1.5MHz and operates with this frequency.
BQ24296RGER Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
24-VFQFN Exposed Pad package
BQ24296RGER Applications
There are a lot of Texas Instruments BQ24296RGER Battery Chargers ICs applications.
- Automotive electronics
- Smart cameras
- Rental fleets
- High end, feature-rich consumer
- Battery backup applications
- Boat
- GPS tracker
- Conventional charge
- Mobile point-of-sale (mPOS) terminals
- Remote sensor
