BQ24314CDSGT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BQ24314 |
| Function | Battery Protection |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 400μA |
| Output Current | 1.5A |
| Adjustable Threshold | YES |
| Supply Current-Max (Isup) | 0.6mA |
| Threshold Voltage | +2.7V |
| Fault Protection | Over Current, Over Temperature, Over/Under Voltage |
| Battery Chemistry | Lithium-Ion |
| Max Junction Temperature (Tj) | 125°C |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24314CDSGT Overview
The package 8-WFDFN Exposed Pad is appropriate for battery instrument. POWER SUPPLY SUPPORT CIRCUIT is the analog IC used by this power management IC. The available channels are 1. Total pins are 8. It comes in a case with a Cut Tape (CT). To mount this electrical component, use Surface Mount. Supply voltage should not fall below 3V volts for this electric component. The Power Management Circuits family of electrical components includes this component. Surface Mount is located in the way of this electronic part. In order for this power management IC to function correctly, the supplied voltage can't exceed 30V volts. It can deliver the functions listed in Battery Protection. A temperature range of -40°C~125°C TJ is optimal for the electric part to deliver its performance. In this electrical part, the battery chemistry includes Lithium-Ion. All times this battery protection IC should be set to 5V. The model is based on the BQ24314 family. Unless specified otherwise, Isup (the maximum supply current) must not exceed 0.6mA. 1.5A is the maximum current the power ICs can accept. With a supply voltage of 400μA volts, it runs. Outputs are set to 1.
BQ24314CDSGT Features
Available in 8-WFDFN Exposed Pad Package
with 8 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium-Ion
operate supply voltage at the range of 5V
With 1 outputs
BQ24314CDSGT Applications
There are a lot of Texas Instruments BQ24314CDSGT Battery Management ICs applications.
- Robot vacuum cleaner
- Electrical management protection
- Medical & healthcare
- Motor bikes
- Submarines
- Accessory drives
- Consumer electronics
- Infotainment/cluster
- Motor drive - single phase AC100V-240V non -isolated
- xEV charging station (off-board charger)
