BQ24352DSGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 10.886217mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24352 |
| Function | Battery Protection |
| Output Voltage | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 4.4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 1A |
| Output Current | 1mA |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 0.5mA |
| Threshold Voltage | +1.95V |
| Fault Protection | Over Current, Over Temperature, Over/Under Voltage, Short Circuit |
| Battery Chemistry | Lithium-Ion |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24352DSGR Overview
The 8-WFDFN Exposed Pad package is suitable for battery instrument. This system battery uses an analog integrated circuit (IC) called POWER SUPPLY SUPPORT CIRCUIT. As of right 1w, there are 1 channels available. The total number of pins is 8. Tape & Reel (TR) is the case number of the package. This electrical part's minimum supply voltage should not be less than 4.4V volts. This electrical component is from the Power Management Circuits family. Surface Mount is mounted in the way of this electronic component. Supply voltage shouldn't exceed 15V volts for this power IC. It is able to deliver the Battery Protection functions. For the electronic part to perform properly, it should be operated at temperature -40°C~125°C TJ. In this electrical part, the battery chemistry includes Lithium-Ion. The battery protector ic is powered by a volt of 5V. It is imperative to keep this transceiver ic set to 5V at all times. There is a use of the BQ24352 family. A maximum of 0.5mA current must be available from the supply (Isup). 1mA is the maximum current the power ICs can accept. Powered by a 1A supply current, it operates on minimal power.
BQ24352DSGR Features
Available in 8-WFDFN Exposed Pad Package
with 8 Pins
Mounting Type: Surface Mount
Battery Chemistry : Lithium-Ion
operate supply voltage at the range of 5V
Output Voltage at the range of 5.5V
BQ24352DSGR Applications
There are a lot of Texas Instruments BQ24352DSGR Battery Management ICs applications.
- ADAS sonar
- TFT cluster
- Power supplies
- Fork lifts
- Base station RRH
- Washing machine
- Motor drive - 3 phase AC400V inverter
- Cell phone towers
- Non-road type vehicles
- xEV charging station (off-board charger)
