BQ24707RGRT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 69.994973mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24707 |
| Pin Count | 20 |
| Output Voltage | 19.2V |
| Max Output Current | 8.128A |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 8A |
| Adjustable Threshold | YES |
| Max Output Voltage | 19.2V |
| Min Input Voltage | 4.5V |
| Supply Current-Max (Isup) | 3mA |
| Nominal Input Voltage | 24V |
| Min Output Voltage | 1.024V |
| Threshold Voltage | +3.75V |
| Fault Protection | Over Current, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 ~ 4 |
| Switching Frequency | 616GHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 19.2V Max |
| Max Charge Current | 8.128A |
| Height | 1mm |
| Length | 3.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24707RGRT Overview
There is a package for Tape & Reel (TR) in which it can be found.For convenience, it is included in the 20-VFQFN Exposed Pad package.There is a mounting type of Surface Mount for this device.It is recommended to set the temperature to 0°C~125°C TJ for reliable performance.It functions by using an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.To charge the device, you need Constant - Programmable current.You can find this device's related parts by searching the base part number BQ24707.20 terminations are present.Batteries have a voltage of 19.2V Max.There are 20 pins on the circuit board.In order for the product to be functional, it requires that you connect the 20 pins according to the instructions.The total number of channels that can be accessed by users is 1.Applied input voltage of 24V does not damage the device.The 19.2V output voltage allows for high efficiency.When the operation is completed, the output current is 8A.Devices in this category are classified as Power Management Circuits.A supply voltage of 4.5V is suitable for it, because it can operate with a low supply voltage.There is 3mA voltage set in Vsup (maximum supply voltage).Input voltage minimum is 4.5V volts, which is a requirement of the device.Its supply carries 500μA current.This part has a switching frequency of 616GHz and operates with this frequency.During this operation, the maximum output supply voltage should be 19.2V.In the course of operation, the maximum output current is reduced to 8.128A.
BQ24707RGRT Features
Battery pack voltage of 19.2V Max
1 channels
Power Management Circuits subcategory
Switching frequency of 616GHz
20-VFQFN Exposed Pad package
BQ24707RGRT Applications
There are a lot of Texas Instruments BQ24707RGRT Battery Chargers ICs applications.
- Tablets
- Smart power strips
- Personnel carriers
- Boat
- Wireless power
- Golf carts
- Cellphones
- Crosswalk marker lights
- PDAs
- Mobile point-of-sale (mPOS) terminals
