BQ25012RHLRG4
| Parameters | |
|---|---|
| Package / Case | VQFN |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PFM MODE IS ALSO AVAILABLE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | HYBRID |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 20 |
| Power Supplies | 5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Current - Output | 500mA |
| Voltage - Output | 4.2V |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 6.5V |
| Switcher Configuration | BUCK |
| Height Seated (Max) | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
BQ25012RHLRG4 Overview
The VQFN package is appropriate for it. This device uses an analog integrated circuit (IC) called SWITCHING REGULATOR. There are 20 pins on it. It's packaged in a Tape and Reel case. It is recommended that this part's minimum supply voltage not be less than 4.5V volts. This electrical component is from the Power Management Circuits family. It is recommended that the chip's supply voltage not exceed 6.5V volts. This device cannot be activated with a value less than -40°C. At temperatures below 125°C, it is recommended that it be used. Voltage 5V is used to power it. All times this device should be set to 5V. In total, it has 20 pins. PFM MODE IS ALSO AVAILABLE can be discovered in this device when used. (Isup) must have a maximum current of 2mA. There is 4.2V voltage output from it. The device is suitable to run the input voltage below 4.5V.
BQ25012RHLRG4 Features
Available in VQFN Package
with 20 Pins
operate supply voltage at the range of 5V
BQ25012RHLRG4 Applications
There are a lot of Texas Instruments BQ25012RHLRG4 Battery Management ICs applications.
- Air conditioner
- Non-road type vehicles
- Peak shaving
- UAV
- Grid support
- Industrial machines
- Home appliances
- 3-wheelers
- ADAS camera system
- Body ECU
