BQ25015RHLTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | PFM MODE IS ALSO AVAILABLE |
| Subcategory | Power Management Circuits |
| Technology | HYBRID |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ25015 |
| Pin Count | 20 |
| Output Voltage | 700mV |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Interface | USB |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 500mA |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 6.5V |
| Switcher Configuration | BUCK |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1MHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ25015RHLTG4 Overview
You can find it in the Tape & Reel (TR) package.We've included it in the 20-VFQFN Exposed Pad package so that it's easier to use.The device is mounted with mounting type Surface Mount.The best way to adjust the temperature is to set it to -40°C~125°C TA.An analog IC of SWITCHING REGULATOR is used in this device.Charge the device by supplying it with Constant - Programmable current.Identify its related parts based on the base part number BQ25015.It has a total of 20 terminations.It is a 4.2V voltage for the battery pack.20 pins are on it in total.In order for the product to function as intended, there are 20 pins that must be connected.It should be able to run off a battery of 5V.An input voltage of 6.5V can be applied to the device without damage.A 700mV output voltage provides high efficiency.There is 500mA output current when the device operates.Devices belonging to subcategory Power Management Circuits include this device.It is capable of functioning at a voltage as low as possible, for example 4.35V voltage for this circuit is used.It was determined during the design process that Vsup (maximum supply voltage) should be set to 2mA.When it comes to the part's power supply, it is set to 5V.It has a 4.5V volt minimum input voltage.It operates at a switching frequency of 1MHz.With this device, it is also possible to generate the additional features of PFM MODE IS ALSO AVAILABLE.A reduction in maximum output current to 500mA occurs during operation.
BQ25015RHLTG4 Features
Battery pack voltage of 4.2V
Power Management Circuits subcategory
Switching frequency of 1MHz
Addtional features of PFM MODE IS ALSO AVAILABLE
20-VFQFN Exposed Pad package
BQ25015RHLTG4 Applications
There are a lot of Texas Instruments BQ25015RHLTG4 Battery Chargers ICs applications.
- Electric vehicles
- Military equipment
- Boat
- Fast charge
- Conventional charge
- Portable medical instruments
- Robot
- Marine buoy lights
- Energy harvesting
- Ruggedized notebooks/tablet computers
